e-ther - unboxing video and music-making

I haven't gone out of my way to send free stuff to influential Youtubers. I don't always enjoy those videos. When someone has bought the product, the review is way more genuine.

I've enjoyed Kale's videos for a long time, He enjoys building, collecting and experimenting with musical instruments from didgeridoos to modular synth components. 

I was delighted when he ordered an e-ther with no prompting from me. Here are his unboxing and his first experiments with the device.



Comments

Post a Comment

Popular posts from this blog

Fitting the MT32 Pi Zero HAT and configuring the software

Image
This post will provide the information you need for setting up my Pi Zero HAT for MT32-Pi. Note that to run MT32-Pi, a Pi Zero 2W is required . The HAT will work with a regular Pi (3 or above) but obviously the form factor is designed to go with the Zero.  Four long screws and nuts are provided, with standoffs and washers. The standoff isn't quite long enough and so the washer goes alongside it between the boards to give the extra mm of hight.  Don't push the HAT all the way home, that'll help with the fiddly job of fitting the washer and standoff.  With the nuts fitted finger-tight, you may like to trim off the extra length. If I didn't supply an SD card containing the software, then you can find that here: https://github.com/dwhinham/mt32-pi See Dale's instructions for creating your SD card here: https://github.com/dwhinham/mt32-pi?tab=readme-ov-file#-quick-start-guide You'll need to do some configuration of the file mt32-pi.cfg This is very easy, just open it...
Read more

Building a Brachiograph

Image
 At Liverpool earlier this year, Andy Piper was demonstrating his brachiograph, or lolly-stick drawing robot arm. Ever since I first had my ZX81 I've been mildly curious about robotics but have never taken the plunge. More recently I've been looking at various plotter projects, even bookmarked a few. Seeing this one in real life and seeing how cheap and easy it was to build (and my boyfriend chucking some servos in my direction) finally tipped me over the edge.  This project turned out to be, as billed, the perfect gateway into robotics. It really is very simple to build and there are tutorials online, including from Andy himself . Thanks for all this Andy! Lots of hotglueing ensued. So far this has all been very robust.  To make the wiring neater, I made this little distribution board. First I screwed the Pi Zero down and found that I couldn't plug anything into it, so had to cut a little plinth for it. I'm not going to pretend that installing the software went without...
Read more

Enclosures for MIDISID

Image
 The default configuration for MIDISID  looks fine and is functional. I have fitted wooden cheeks to my own, which gives it a look and tilts the top forward, making it a little easier to use when you're sitting back from it. MIDISID was designed from the start with 'bring your own box' in mind. It's a modular design, the top and bottom parts are easily separated and connect with a 4-way jst-sh cable. In my head I saw it being used in a sloping-top case. Paul of Bad Dog Designs has come up with a different solution. It achieves the same goal - tipping the controls and screen forward. It's a 3D print in two parts. It takes zero effort to fit - MIDISID just drops in. I don't know whether he has made the design files public but  please contact him  if you're interested. Update Nov '23 The current version of MIDISID is now larger, has a tilted front and custom side supports: Owners are still being creative with enclosures. Here's a beautiful one from  @k...
Read more